Data Acquisition (DAQ) and Control from Microstar Laboratories

Isolated Analog Inputs & Outputs: MSXB 085

data acquisition filtering data acquisition software channel architecture enclosures services

When you need analog inputs and outputs protected from noise

click to view MSXB085 photo

 

DAP 5216a

DAP 5200a

DAP 5016a

DAP 5000a

DAP 4000a

 

MSXB 085 PDF Manual

Configuration Software Manual

Configuration Software

The MSXB 085 Isolated Analog Signal Interface Module provides isolated analog inputs and isolated analog outputs for DAP systems. Use these modules to eliminate ground currents – a potential source of noise in your measurement and control signals – and eliminate timing skew.

Each module provides sixteen isolated analog inputs and two isolated analog outputs, and all inputs are differential, with 16-bit data conversion on the module itself – to minimize exposure to noise elsewhere in the system. The module can sample signal inputs at 333k samples per second and can update both signal outputs at 500k updates per second. A single DAP board can support up to eight MSXB 085 modules.

The module is a good fit in applications that have a number of analog inputs and a smaller number of analog outputs. Up to eight Isolated Analog Signal Interface Modules can be connected to a single DAP board for a total of 128 analog inputs and 16 analog outputs.

If you require groups of simultaneous isolated inputs, you can use multiple modules. Contact Applications Engineering at Microstar Laboratories for assistance.

MSXB 085 fits in an Industrial Enclosure and uses a DB-37 connector or Wago terminals.

MSXB 085 modules also fit directly into a DAPserver to form a networked, isolated instrument. Add MSXB 078 modules for isolated digital inputs and outputs, if your application requires these as well as the isolated analog inputs and outputs included with MSXB 085 modules. Add MSXB 076 modules if your application requires additional isolated analog outputs.

Models

  • MSXB 085-01-E3K: DB-37 panel
  • MSXB 085-02-E3C-B: Wago terminals, 20 insulated BNC termination panel
  • MSXB 085-02-E3X: Wago terminals, 4-slot blank termination panel
  • MSXB 085-02-E3Y: Wago terminals, 1-slot blank termination panel
  • Other panel options are available.

Stand-Alone and Single-Board-Enclosure models

Channel-to-PC Isolation – MSXB085

analog input and output isolation diagram