Isolated 16-Bit Analog Outputs: MSXB 076
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
When you need isolated analog outputs
|
View Photo |
|---|
|
|
|
Compatible with |
The Microstar Laboratories Isolated 16-Bit Analog Output Board, part number MSXB 076, provides isolated analog outputs for Data Acquisition Processor (DAP) systems. Use these boards to eliminate ground currents – a potential source of noise in your measurement and control signals – as well as to eliminate phase errors from analog outputs in your application.
MSXB 076 includes eight single-ended analog outputs, with an isolated ground for each output, and features simultaneous updating for multiple boards, across all channels. MSXB 076 offers high signal density and enables high channel counts.
Microstar Laboratories Channel Architecture allows up to 8 MSXB 076 boards to connect to a single DAP board to provide isolated analog output at a low cost per channel. Contact applications engineering at Microstar Laboratories for higher channel count systems.
The Isolated Analog Output Expansion Boards connect to the Data Acquisition Processor's digital connector. If digital input/output is needed in addition to analog output expansion, a Digital Expansion Board is required.
There are several cabling options for the MSXB 076 Analog Output Expansion Board. The board may be connected to a DAP using various 100-line cabling options, or can be installed into a Digital Backplane.
Industrial Enclosure compatible model
- Model MSXB076-01-E3K-F: female DB-37 connector
Channel-to-Channel Isolation – MSXB076
Please contact Microstar Laboratories for more termination and enclosure options.
To understand the part number suffixes for our Eurocard boards (i.e., "E3K"), take a look at the explanatory table.
Or contact us – our engineers will help you specify the parts for your unique application.
